Pressure reducing threaded valve with electrical control and plastic pilot

Description

Hydraulic control valve used to reduce the inlet pressure to a preset lower level pressure in the outlet by means of a three way plastic reducing pilot incorporated. The control of the valve is done by means of a 3/2 solenoid incorporated. When the solenoid opens the valve it starts to control the outlet pressure and maintains it constant without being affected from upstream flow and pressure variations. The signal might be coming from a Controller, main switch, PLC, etc.
When upstream pressure value is lower than the downstream preset pressure value, the valve opens completely.

Applications

Downstream pressure control.

Available models

1 ½”, 2”, 2 ½”, 3” and 4” BSP (NPT optional)

Dimensions / Pressure loss

Download technical PDF

Download PDF technical features and dimensions

Download PDF schemes

Description

References and dimensions
Product code	Valve	L	H	W	Kg.
892315+498310	1″1/2	180	128	128	4,9
892320+498310	2″	180	128	128	4,7
892325+498310	2″1/2	230	135	128	5,6
892330+498310	3″	240	165	172	8,4
892340+498310	4″	295	200	204	12,6

Codes of valves with high pressure diaphragm AP,for valves with low pressure diaphragm BP please consult. Valves with 24 VAC NO solenoids. Other, consult.

Minimum working pressure
Valve	Low Pressure	High Pressure
1″1/2	0,3	0,7
2″	0,3	0,7
2″ 1/2	0,3	0,7
3″	0,5	0,9
4″	0,5	1,0

Solenoids
Port	Ways	Function	Orifice	Body Material	Voltage*	Wires
1/8″”	3	NO,NC	1,2;1,6	Reinforced Nylon	24 VAC; 9-12 Latch	2
1/8″; 1/4″	3	NO,NC	1,2;1,6;2,0	Brass	24 VAC; 110 VAC; 9-12 Latch	2

MAXIMUM PRESSURES:

Plastic Body: Protection Class IP66
Function	Orifice	AC	DC	DC Llatch
NC	1,2	11	9	11
	1,6	6	5	6
NO	1,2	12	12	12
	1,6	8	8	8

Brass Body: Protection Class IP65 with connector
Function	Power	Orifice
		1,2	1,6	2,0
NC	ADC	20	15	10
	AC/8W DC/10W	30	17	14
	AC/5,5W	20	15	10
	AC/2,5W DC/5,5W DC/3,5W	16	10	9
NO	ADC	20	15	11
	AC/8W DC/10W	22	17	12
	AC/5,5W	20	15	11
	AC/2,5W DC/3,5W	18	12	8